View Single Post
Old 01-28-2019, 08:22 AM   #14
30 Closed Cab PU
Senior Member
 
Join Date: Aug 2018
Posts: 2,332
Default Re: Shock absorber, mounting

Quote:
Originally Posted by Werner View Post
Hello,

Yes of course these are the old bumpers. The first built with adjustment arrow and Ford stamp, the other without adjustment arrow and cast manufacturer name.

The new Stipes now have clearance from customs and will be delivered tomorrow. 1 set of Stipes costs incl. Freight & customs $ 2000.

Unfortunately, I also believe that these are completely different composite components. Because also the whole rear axle was botched. Wrong spring (8 sheets), wrong briden from the truck (too flat), the wrong centering screw with 6-edged head (does not fit in the 4-edge recording), rusted shackles, both brackets clamps against twisting have been missing. ...

Thanks for the useful hints!

Hi Werner,


Some truck owners remove a couple of spring leafs to improve the ride of the truck. Trucks ride very rough/stiff with the 10 leaf spring. If you are not happy with the ride there should be info here on VFF; on which leafs to remove, modifying the ends of the leafs with a chamfer, and lubricating the leafs.

Last edited by 30 Closed Cab PU; 01-28-2019 at 08:23 AM. Reason: typo
30 Closed Cab PU is offline   Reply With Quote