View Single Post
Old 03-29-2018, 05:35 PM   #23
Fred A
Senior Member
 
Fred A's Avatar
 
Join Date: May 2010
Location: Encino California, near Burbank
Posts: 661
Default Re: Acetylene regulator

Quote:
Originally Posted by Corley View Post
There are single stage and dual stage regulators. If you want steady pressure control, like for welding, you will want a dual stage regulators. Some of the cheapies are ok, just make sure you get a dual stage.


Trotted out to check my regulators and found that both acetylene were single stage. The good USA brands at work were found to be single stage. Since the acetylene pressure is a fraction of the Oxygen, seems like an engineering overkill to bother with the second stage. Worth checking if the number of stages is at all an issue. Good Luck: Fred A
Fred A is offline   Reply With Quote