The Ford Barn - View Single Post

PC/SR · 04-29-2018, 08:12 PM

I have a Weiand head, cc'd to 6.8 CR, but had to opened the chambers a bit for oversize valves. It is similiar to the Winfield crows foot design. Good head. Use it. PS: I have babbitt bearings and have not had any problems.

04-29-2018, 08:12 PM	#4
PC/SR Senior Member Join Date: May 2010 Location: Santa Rosa, CA Posts: 1,279	Re: Weiand model A head I have a Weiand head, cc'd to 6.8 CR, but had to opened the chambers a bit for oversize valves. It is similiar to the Winfield crows foot design. Good head. Use it. PS: I have babbitt bearings and have not had any problems.