Re: head gasket/6:1/mystery?
Update on cylinder head. As stated the 6.1 head was sent back to Snyder's and a 5.5:1 head was installed in its place with the felpro copper gasket and two coats of coppercoat. So far 300 mi.and 3 retorques with only one head nut being taken up about 1/8 inch of a turn.
Snyder's has made this head problem more than right with my friend; so much so that he called and asked Tom if he had made a mistake.
Snyder's is a quality company with quality customer support. Thank You, Tom.
Chet
|