The Ford Barn - View Single Post

Greg Jones · 12-11-2018, 10:04 AM

Depending on the condition of the threads on your arrestor it may be pretty tight or even rusted. Might apply some kroil or liquid wrench. I would NOT use open flame heat for obvious reasons.

12-11-2018, 10:04 AM	#5
Greg Jones Senior Member Join Date: Jul 2010 Location: Aiken, South Carolina Posts: 695	Re: Screen in Gas Tank Removal Depending on the condition of the threads on your arrestor it may be pretty tight or even rusted. Might apply some kroil or liquid wrench. I would NOT use open flame heat for obvious reasons.