View Single Post
Old 07-19-2019, 12:19 AM   #12
DavidG
Senior Member
 
DavidG's Avatar
 
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,069
Default Re: Broken Glass Again

It is a simple answer, but it isn't that simple (simply centered or off centered). The ends of the metal channel must not touch the side window channels at any point during the entire travel of the glass/bottom steel channel assembly from the bottom to the very top. Only if the angle of the front part of the door window opening is exactly equal to the angle of the back part of the door window opening would the bottom steel glass channel be centered on the glass. As 'deuce roadster' indicates above that assumes that you have '33 doors and '33 window regulators and not '34s.
DavidG is offline   Reply With Quote