Thread
:
How to remove drum & hub from the type with the hub flange is OUTSIDE of the drum?
View Single Post
07-16-2019, 01:24 PM
#
5
Andy
Senior Member
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,770
Re: How to remove drum & hub from the type with the hub flange is OUTSIDE of the drum
The swedged material is real soft. It had to be so it could be swedged. A mild steel 5/8 deep hole saw works just fine.
Andy
View Public Profile
Send a private message to Andy
Find More Posts by Andy