Re: Pressure Plate
Where is this "5/8" figure coming from, there seems to be a obsession with adjusting the pressure plates, the spec I have from a Ford clutch, transmission rebuild book (# 3697-47) is 3/4" for the pre 1935 pressure plate, and a disc or gauge plate thickness of 0.340"
11/16 for the 35 on 9" with .340 disc (V8 clutch as used in conversions)
15/16 for 10" PP with 0.295 disc/gauge plate
7/8" for 11" PP with 0.365 disc/gauge plate
|