The Ford Barn - View Single Post

Drive Shaft Dave · 09-16-2014, 10:37 PM

The end play should be held to .006, There is a collar that the vendors sell that fits behind the fan ,held by a set screw. The boss inside the head that is used to control the end play is worn down. There are other ways to fix this but the collar is probably the simplest.

09-16-2014, 10:37 PM	#2
Drive Shaft Dave Senior Member Join Date: Dec 2011 Location: New hope Minnesota Posts: 742	Re: Axial Play in Water Pump Shaft The end play should be held to .006, There is a collar that the vendors sell that fits behind the fan ,held by a set screw. The boss inside the head that is used to control the end play is worn down. There are other ways to fix this but the collar is probably the simplest.