View Single Post
Old 06-15-2019, 08:23 PM   #11
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,397
Default Re: Best way to scuff a clean head

"The water jackets looks pretty clean, no blocked ports so I should be OK there."


I've never seen blocked ports, but a lot of rusty crud settles in the rear bottom of the cooling chamber. Dig around with an old cable or some such, then blow out the junk.
Tom Wesenberg is offline   Reply With Quote