View Single Post
Old 09-13-2018, 09:30 AM   #14
Senior Member
katy's Avatar
Join Date: Jun 2015
Location: Alberta, Canada
Posts: 2,015
Default Re: Front inner race turns on hub

The inner races should not be a tight fit on the spindle, it shouldn't be wobbly loose either though----- you should be able to slide the bearing on-- off with just fingers
A squeak tells me that something is dry, if there's sufficient grease in/around the bearing and races the bearing shouldn't squeak even if it's loose on the spindle. I would suspect something else is squeaking, possibly the drum is hitting the backing plate or maybe the king pin bearings are dry. Or?
Don't go away mad, just go away.
katy is offline   Reply With Quote