View Single Post
Old 03-22-2016, 08:30 AM   #15
Bob Bidonde
Senior Member
 
Bob Bidonde's Avatar
 
Join Date: May 2010
Location: Long Island, NY
Posts: 1,434
Default Re: Body to frame! Anyone ever have this?

Don't force the body down. Spend the time to find out why the body is not lying correctly. There should be about a uniform 1/4" gap between the body and running board aprons. There should be a 1/4" thickness of rubber shim at each body to frame bolt.

If you force the body down onto the frame, I would expect you will have some horrible door and or hood alignment problems.

Insert some 2x4 pieces of wood between the body and the frame, and look for the cause of the problem.
Attached Images
File Type: jpg DSCN0865.jpg (65.7 KB, 156 views)
__________________
Bob Bidonde
Bob Bidonde is offline   Reply With Quote