View Single Post
Old 05-18-2013, 08:07 PM   #5
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,903
Default Re: Steering shaft to upper worm race orientation

Don't tighten that upper race too much. You could crack it. These boxes aren't complicated but you do have to do everything right. The FSB takes you through it all step-by-step. If you have the earlier type Joe describes you need to replace the worm along with the bearings.
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote