Re: help needed
Just to give a direction to go in, '49 -'51 Mercury as well as F! pickups used the 11" Bendix brakes. The cylinder on the Merc. is two (2) bolt.
Don't know for sure but the F1's are probably the same because most of the brake hardware is interchangeable with the Mercury.
The differences come in the shape of the backer plates.
The axles should just pull out after removing backer bolts to release retainer plate.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
Last edited by 51 MERC-CT; 06-16-2019 at 05:54 PM.
|