The Ford Barn - View Single Post

Mike Peters · 01-19-2022, 02:12 PM

Couple things: I didn't see any safety devices for the big body panel press that would keep the young guy pulling finished rear body panels out after stamping from getting caught in the press by mistake. He's gotta be on his toes all day.
Also, the man bolting finished body panels together with the 10-32 screws is wearing heavy gloves. It's all I can do to start those little screws myself bare handed.
Thanks for the video!! Loved it.

01-19-2022, 02:12 PM	#3
Mike Peters Senior Member Join Date: Aug 2012 Location: South East Wisconsin Posts: 1,279	Re: Model A Body Assembly video Couple things: I didn't see any safety devices for the big body panel press that would keep the young guy pulling finished rear body panels out after stamping from getting caught in the press by mistake. He's gotta be on his toes all day. Also, the man bolting finished body panels together with the 10-32 screws is wearing heavy gloves. It's all I can do to start those little screws myself bare handed. Thanks for the video!! Loved it.