View Single Post
Old 08-09-2018, 07:59 AM   #14
Hoop
Senior Member
 
Hoop's Avatar
 
Join Date: May 2010
Location: Jacksonville FL
Posts: 1,137
Default Re: Abrupt stop in reverse gear

Check the pins with their cotter pins that hold the brake assembly together and make sure they are not installed backwards.

Definitely will snag, engage the brake and make you think you backed into a brick wall.

(Of course, if you want to remove and disassemble the rear end first .... )
__________________
"Remember that when it comes to intelligence, half of all of us are below average."
Hoop is offline   Reply With Quote