The Ford Barn - View Single Post

Charlie Stephens · 07-19-2018, 10:14 PM

If you can locate one hole accurately you should be able to drill the rest using the damper as a template. Just be sure everything is aligned and snug before you start drilling.

I would consider leaving the damper off, it is a unique bit of history for the truck. It would make a good conversation starter at shows.

A little off topic but you used to be (and I assume still are) able to get the pads for the damper from Dave Renner, rennerscorner.com, (734) 428-8424 He also stocks a lot of other unique Model B stuff.

Charlie Stephens

07-19-2018, 10:14 PM	#8
Charlie Stephens Senior Member Join Date: May 2010 Location: Southern California Posts: 7,033	Re: 32 B PU damper location holes If you can locate one hole accurately you should be able to drill the rest using the damper as a template. Just be sure everything is aligned and snug before you start drilling. I would consider leaving the damper off, it is a unique bit of history for the truck. It would make a good conversation starter at shows. A little off topic but you used to be (and I assume still are) able to get the pads for the damper from Dave Renner, rennerscorner.com, (734) 428-8424 He also stocks a lot of other unique Model B stuff. Charlie Stephens Last edited by Charlie Stephens; 07-19-2018 at 10:37 PM.