The Ford Barn - View Single Post

FlatheadTed · 10-12-2020, 07:31 PM

Cut a slot in them or get a chisel under the plate or Get a nail and tin some solder to it at one end ,then solder the drive nail and it together with a good soldering iron ,then unscrew it

10-12-2020, 07:31 PM	#4
FlatheadTed Senior Member Join Date: May 2010 Location: Auckland Posts: 4,705	Re: Trick to remove OFF ON ignition plate Cut a slot in them or get a chisel under the plate or Get a nail and tin some solder to it at one end ,then solder the drive nail and it together with a good soldering iron ,then unscrew it __________________ http://www.flatheadted.com Flathead Ted brake Floaters ,