The Ford Barn - View Single Post

Bruce/CT · 07-15-2020, 08:54 AM

Hi Walt,
My painter had a sheet of material that he uses for door card. I cut it into strips and sanded them to fit into the original steel molding. My upholsterer has not done the op yet so the end result is unknown.
Hope this helps, Bruce

07-15-2020, 08:54 AM	#2
Bruce/CT Senior Member Join Date: May 2010 Location: Middlebury, CT Posts: 780	Re: 1935/36 roof tack strip Hi Walt, My painter had a sheet of material that he uses for door card. I cut it into strips and sanded them to fit into the original steel molding. My upholsterer has not done the op yet so the end result is unknown. Hope this helps, Bruce __________________ Failure is simply the opportunity to begin again, this time more intelligently.......Henry Ford