The Ford Barn - View Single Post - Restoration Qs...early 28 transmission case

columbiA · 09-30-2013, 06:49 PM

Center the cluster gear with the main drive gear,then measure with a feeler gauge the clearance on ends of cluster.After cleaning up any roughness on case,install steel shim washers until you have around .006" clearance.

09-30-2013, 06:49 PM	#3
columbiA Senior Member Join Date: Nov 2011 Location: B.C. Canada Posts: 1,746	Re: Restoration Qs...early 28 transmission case Center the cluster gear with the main drive gear,then measure with a feeler gauge the clearance on ends of cluster.After cleaning up any roughness on case,install steel shim washers until you have around .006" clearance.