The Ford Barn - View Single Post - Toe-in tools

Dave in MN · 08-07-2019, 07:01 AM

Clever idea!

FWIW: Using a Duby stick I once adjusted toe in on my Phaeton off the floor on the car lift. Sure was easy. It tracked like crap. I did the same procedure but this time on the floor and it needed re-adjustment. After adjustment, with the load of the car on the components, it went down the road like an arrow. On my car it made a difference.

Every car is in a different state of wear or repair so I am not surprised it will work for some and not for others. In the end, the car needs to go down the road straight and conserve the tires. Use what works on your car.
Good Day!

For info search: Duby Wheel Aligning Gauge

08-07-2019, 07:01 AM	#16
Dave in MN Senior Member Join Date: May 2010 Location: Jordan, MN Posts: 1,411	Re: Toe-in tools - easy and accurate Clever idea! FWIW: Using a Duby stick I once adjusted toe in on my Phaeton off the floor on the car lift. Sure was easy. It tracked like crap. I did the same procedure but this time on the floor and it needed re-adjustment. After adjustment, with the load of the car on the components, it went down the road like an arrow. On my car it made a difference. Every car is in a different state of wear or repair so I am not surprised it will work for some and not for others. In the end, the car needs to go down the road straight and conserve the tires. Use what works on your car. Good Day! For info search: Duby Wheel Aligning Gauge Last edited by Dave in MN; 08-07-2019 at 01:07 PM.