Thread: Fuel line
View Single Post
Old 06-18-2019, 08:06 AM   #15
eagle
Senior Member
 
eagle's Avatar
 
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 1,604
Default Re: Fuel line

Quote:
Originally Posted by DNLs1930 View Post
Agreed; Just replaced this line with the Mac's line and other than a slight "adjustment to the shape" it was perfect!


I came across a suggestion to put Teflon tape on the ferrules (not the fitting threads) before installing. Anyone do this?
Not necessary, brass is soft and will form to the fitting. If its been removed and overtightened too many times, just replace rather than try to fix it up with a bandaid.
__________________
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."
eagle is offline   Reply With Quote