Thread: Fuel line
View Single Post
Old 06-15-2019, 07:09 PM   #5
JoeCB
Member
 
JoeCB's Avatar
 
Join Date: Nov 2018
Location: Farmington MI
Posts: 98
Default Re: Fuel line

Here is a trick that I have used to avoid leaks. I use 1/4" steel brake line with brass compression ferrules , but before installing, I position the ferrules on the tube and carefully sweat solder the ferrules to the tube. This helps seal the joint without having to use excessive force on the fitting to compress the ferrules tight to the steel tube.
Joe B
JoeCB is offline   Reply With Quote