The Ford Barn - View Single Post

rocket1 · 04-23-2020, 10:24 AM

I have had the same problem,two different blocks,different dist,I replaced the shaft and tapped it down ,still the dist.rests about 1/8 off the head.I finally ground off both ends of shaft to make it seat,this is what I had done before.I don't know what the answer could be.

04-23-2020, 10:24 AM	#11
rocket1 Senior Member Join Date: Mar 2014 Location: Midland Park,N.J. Posts: 1,108	Re: Problem installing distributor I have had the same problem,two different blocks,different dist,I replaced the shaft and tapped it down ,still the dist.rests about 1/8 off the head.I finally ground off both ends of shaft to make it seat,this is what I had done before.I don't know what the answer could be.