View Single Post
Old 09-22-2019, 07:04 PM   #27
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 5,044
Default Re: Unusual carburation on Flathead V8ís

The only good thing that came out of this whole thing is that when I was running the numbers on a couple of Quadrajets I had to get the proper kits, I found out one was from a 1979 390 HP 454 Corvette. I sold it on eBay for $400 (matching numbers Corvette guys). It was the best core I had; I was reduced to using a core from a very dirty '75 Oldsmobile; I don't know if it was my deficit in rebuilding it or just a bad core.

I am going to get back into this some day, but I think one of the posters above was right; the next time I dive into this I am going to make an adapter that hast four individual throttle bores instead of the open plenum I originally used.

Last edited by tubman; 09-22-2019 at 07:17 PM.
tubman is online now   Reply With Quote