View Single Post
Old 08-27-2019, 12:12 AM   #6
deuce lover
Senior Member
 
deuce lover's Avatar
 
Join Date: May 2010
Location: Southern France
Posts: 2,973
Default Re: 1936 coil testing

Quote:
Originally Posted by Blastfromthepast View Post
Thanks bubbas. I have the ohm meter but Iím confused with test.
Where do you touch the ohm meter to and find out the primary and secondary.



Quick test with an Ohm meter,touch one to the terminal (where wire from ign switch goes to) and the other at the condenser terminal.If it buzzes its(windings) are closed so car should start (if condenser is good).Doesn't mean that the coil is totally good.I have had them when they get hot - fail then start back up when cooled down.I have had NOS OEM Ford coils in the box that tested open-no good.
deuce lover is offline   Reply With Quote