View Single Post
Old 06-24-2019, 09:08 PM   #17
Senior Member
Join Date: Jun 2010
Location: 34.22 N 118.36 W
Posts: 357
Default Re: Help rear main leak

So to be clear, you put a bypass line from the oil galley to the pan with no restrictor?

Are you making any oil pressure to feed the bearings?

Typically the oil is picked up from the block pump retention hole, passed thru a filter and then back into the oil galley thru side cover.

Better make sure you have pressure to bearings, better sooner than too late.

As Carroll Smith wrote; All Failures are Human in Origin.
johnneilson is offline   Reply With Quote