Quote:
Originally Posted by miker98038
I haven't looked into this in some years. But early on with LED's you needed a different flasher, and they were a 3 wire. 3rd wire was ground, IIRC. The original wiring on my bird was a 2 wire and the flasher was in a clip by the steering column as I remember. So running the 3rd terminal to ground should solve it.
Edit. I went and looked, Jets shows them for both 2 and 3 terminals now.
https://www.jegs.com/p/JEGS/JEGS-LED...72412/10002/-1
|
Miker........you are correct. I put them in my 12V avatar and all I did was to install the bulbs-nothing else.