View Single Post
Old 01-19-2018, 06:27 PM   #16
Bob Grieb
Senior Member
 
Bob Grieb's Avatar
 
Join Date: Oct 2010
Location: Temecula, California
Posts: 325
Send a message via Yahoo to Bob Grieb
Default Re: Directional Light Switch

I finally resolved the problem with my flasher unit.
What started out to be what appeared to be burned out light bulb turned out to be as bad connection.
When the flasher unit was originally installed a terminal strip was used. As a last effort to resolve my issue before resulting to the use of a buzzer I downloaded a schematic of the switch installation. I then checked every termination and found a loose termination that was not apparent thru visual examination. The wire to the flasher unit "X" terminal was loose/open. The unit had worked since I purchased the car and it was never a problem until now.

Thanks for all the input.

Bob
__________________
1929 Tudor
1930 Pickup
Bob Grieb is offline   Reply With Quote