The Ford Barn - View Single Post

nick c · 11-01-2019, 08:43 AM

When I restored my 29 AA axle, I noticed the castle nut went past the cotter pin hole, so I removed the nut and found 2 fender washers, they were about 1/16" thick, drilled out the center to the same as the shank, tightened the nut, it worked.
good luck

11-01-2019, 08:43 AM	#12
nick c Senior Member Join Date: Aug 2010 Posts: 260	Re: Perch Pin Play... When I restored my 29 AA axle, I noticed the castle nut went past the cotter pin hole, so I removed the nut and found 2 fender washers, they were about 1/16" thick, drilled out the center to the same as the shank, tightened the nut, it worked. good luck