View Single Post
Old 03-13-2018, 06:07 AM   #15
Jacksonlll
Senior Member
 
Jacksonlll's Avatar
 
Join Date: Jul 2012
Location: Michigan-- Member of Oakleaf of MARC
Posts: 1,686
Send a message via ICQ to Jacksonlll
Default Re: Zenith carb stall

A vacuum leak can cause this too. When you redid your carb, I hope you made sure the two surfaces were flat. Put a file to both the manifold flange and the top of the carb to make sure they are flat. For the manifold, use a mirror and a light. Not a bad job. A leak in your manifold could also be the problem.
Jacksonlll is offline   Reply With Quote