The Ford Barn - View Single Post

abachman3 · 10-12-2017, 10:21 AM

Most people that I know use a chisel and hammer to loosen that nut. They also tighten it in the same manner, which is why the nuts are so buggered up in the first place. Just place the chisel towards the outside edge of the flat side of the nut and hit it well with the hammer. It works, but is not kind to the nut.

10-12-2017, 10:21 AM	#9
abachman3 Senior Member Join Date: Jun 2013 Location: Western Springs, IL Posts: 323	Re: camshaft nut problems Most people that I know use a chisel and hammer to loosen that nut. They also tighten it in the same manner, which is why the nuts are so buggered up in the first place. Just place the chisel towards the outside edge of the flat side of the nut and hit it well with the hammer. It works, but is not kind to the nut.