View Single Post
Old 10-15-2019, 10:37 AM   #3
ryanheacox
Senior Member
 
ryanheacox's Avatar
 
Join Date: Apr 2013
Location: Northwest CT
Posts: 669
Default Re: Rear spring shackle

The problem (or maybe not a problem) is that the shackle pin is maybe 7/16" and the bore of the bushing is over 1/2".



I installed those same shackles and was not impressed with the fit of the bushings but I've put a couple hundred miles on them and they seem okay. I've been toying with the idea of making an oil-lite bushing to replace the poor fitting one they come with.

Last edited by ryanheacox; 10-15-2019 at 01:34 PM. Reason: Dimensions
ryanheacox is offline   Reply With Quote