The Ford Barn - View Single Post - Troubleshooting: need nominal 12v ignition coil/condenser values

COE Dan · 03-03-2018, 04:48 PM

Thanks for the quick reply. I checked the coil and I'm showing 1.4 ohms on the primary and about 7800 on the secondary (at about 60 degrees - might go up a bit when it warms up). I'll check the resistor and the condenser next. Thanks much!

Dan

03-03-2018, 04:48 PM	#3
COE Dan Senior Member Join Date: May 2010 Location: Now in Wichita, KS Posts: 251	Re: Troubleshooting: need nominal 12v ignition coil/condenser values Thanks for the quick reply. I checked the coil and I'm showing 1.4 ohms on the primary and about 7800 on the secondary (at about 60 degrees - might go up a bit when it warms up). I'll check the resistor and the condenser next. Thanks much! Dan