View Single Post
Old 08-26-2015, 09:06 PM   #4
paul2748
Senior Member
 
paul2748's Avatar
 
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,965
Default Re: Nine Inch Ford rear end in 1936 Ford

I would recommend the parallel springs. There are a couple of manufacturers that provide bolt in kits. With this setup, you don't need radius rods or another means of keeping the rear in place.
__________________
48 Ford Conv
56 Tbird
54 Ford Victoria
paul2748 is offline   Reply With Quote