The Ford Barn - View Single Post

Bored&Stroked · 11-23-2019, 03:57 PM

I just went out to the garage and measured my 32 Cab - the dimension you show is about 3/4". I have all stock/original components, but I did replace the rubber bumpers that control the opening (one was missing, the other was shot). I made sure the bumper brackets were not bent as well - everything aligns as it should. Good luck - if you need any other 32 Cab stuff, just PM me.

11-23-2019, 03:57 PM	#2
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,067	Re: 32 Cabriolet rumble seat gap ? I just went out to the garage and measured my 32 Cab - the dimension you show is about 3/4". I have all stock/original components, but I did replace the rubber bumpers that control the opening (one was missing, the other was shot). I made sure the bumper brackets were not bent as well - everything aligns as it should. Good luck - if you need any other 32 Cab stuff, just PM me.