Quote:
Originally Posted by Joe K
....
When properly adjusted, the bowl level (regulated by the inlet float valve of your carb) should be "just below" the level of the main "jets" of your carb. There may even be a published level for your Tillitson Model X but I can't remember what exactly this is.....
Joe K
|
Going off topic perhaps.... I have never had much joy using this fuel gauge with Tillotsons as I have never found specs for the fuel level in Tillys other than various books saying invert the upper body and then adjust the float to 1 inch from the flat surface of the body ... not very scientific as obviously float weight makes a difference to this rough and ready advice. Can anyone give the correct measurement for the fuel level on a Tilly? and tips on how to achieve it ?