02-22-2020, 12:13 PM
|
#187
|
Senior Member
Join Date: Dec 2018
Location: Southbury Ct
Posts: 147
|
Re: 36 Ford drag link orientation question
I mean for gaskets and sometimes parts. For example, If you go to the last link you sent, the guy supplied a link to a parts house, https://bestgasket.com/vintage-engine-gaskets/
In the search for the gasket set a couple of options thru me. Basically V-8 Flathead or V-8 Flathead -Big Bore?
If I am going to change the pan, I am not going to put much more effort into it. Worse comes to worse. I will just put the 36 arm back on so I can move the car. While it is on jack stands, I want/need to adjust the brakes. Car pulls bad to the left under braking
That is what I have, a 4 post, best investment ever. It is a backyard buddy, very expensive but awesome quality and safety, also made in the USA. I have the jacking trays and 2 scissor jacks with 3/4" nuts welded on it make getting the wheels off the ramps is a snap, just touch it with an impact gun. The only issue I have is the ramps itself gets in the way for certain jobs.
|
|
|