Sponsored Links (Register now to hide all advertisements)
You're welcome David!
I hear you on the oversimplification. I often see posts "it took me an hour,", etc. No way could you do what they said in an hour unless you had every tool laid out and you did the same job often.
The block size is not larger, the stroke is though at 4" versus 3.75".Take a look at this link and poke around on Vanpelt's site. There is lots of good info there.
Great that you have a lift to do the work! I have a four post that I got about four years ago and love it. It is much easier to work on and get the car at just the right height to do work on it.
I know you bought a gas welder a while ago but it may be easier to take your Pitman arm and piece of stiff wire or coat hanger, bent as you want it to be for either your use or a good repair or muffler shop, to use when bending the arm.
I can take that old broken down Cobra off your hands and dispose of it properly ;-)
Glenn