David, I can't give an exact procedure to accomplish what are are trying to do. I have not done this exact swap. Maybe try the hamb also.
Few things to consider:
Changing out the steering box. As posted above.
Bending the steering arm. Mapp gas won't do it, you will need someone experienced with a torch. Even then a 36 stock arm might not be long enough. *** just remember the lower you drop it the more you increase the possibility of the "death wobble". Angles are important.
Shorting the drag link is not a big deal.
Do one thing at a time
.
Some nonsense and observations just looking through this thread.
.