The Ford Barn - View Single Post

hotrodart · 03-19-2019, 02:41 PM

I used a Mustang BOSS mc with 15/16" bore on my '40 with MAGNUM disc front brakes. The mc cover hit the floorboard so I sectioned it about 5/16" to clear. Works very well, but I suggest you look into using the Corvette mc for fit....you did not say what car you are working on.

03-19-2019, 02:41 PM	#4
hotrodart Senior Member Join Date: May 2010 Location: Shenandoah Valley Virginia Posts: 220	Re: Master cylinder I used a Mustang BOSS mc with 15/16" bore on my '40 with MAGNUM disc front brakes. The mc cover hit the floorboard so I sectioned it about 5/16" to clear. Works very well, but I suggest you look into using the Corvette mc for fit....you did not say what car you are working on.