The Ford Barn - View Single Post

Sid · 11-29-2019, 09:28 PM

Does anyone have a recommendation for cold valve lash on a Isky Max 1 cam. Isky recommends .014 hot. It's obvious they must not be familiar with flatheads. I know that generally on an ohv engine you give about +.002 for a cold setting. Motor has close to 800 miles so everything should be settled in by now. This is a 59AB Any info. is appreciated.

11-29-2019, 09:28 PM	#1
Sid Senior Member Join Date: May 2010 Location: Rathdrum Idaho Posts: 737	Isky Max 1 valve lash Does anyone have a recommendation for cold valve lash on a Isky Max 1 cam. Isky recommends .014 hot. It's obvious they must not be familiar with flatheads. I know that generally on an ohv engine you give about +.002 for a cold setting. Motor has close to 800 miles so everything should be settled in by now. This is a 59AB Any info. is appreciated.