The Ford Barn - View Single Post

Nlbloch · 04-25-2019, 04:14 PM

Thanks, everyone, for your replies. That has to be the most difficult zerk fitting. My 1930 coupe has a rubber floor mat which has been riveted into place at the top. So to access the opening, I must lift the floormat half way, raise the gear shift and parking brake rubber floor gaskets, and stick my hand deep inside. Surely there must be a better way -- but I couldn't find one.

Now that this is done, I must ask: what is being lubricated in the bell housing?

04-25-2019, 04:14 PM	#8
Nlbloch Member Join Date: Apr 2011 Posts: 70	Re: Lubrication chart in Les Andrews' book Thanks, everyone, for your replies. That has to be the most difficult zerk fitting. My 1930 coupe has a rubber floor mat which has been riveted into place at the top. So to access the opening, I must lift the floormat half way, raise the gear shift and parking brake rubber floor gaskets, and stick my hand deep inside. Surely there must be a better way -- but I couldn't find one. Now that this is done, I must ask: what is being lubricated in the bell housing?