The Ford Barn - View Single Post

russcc · 11-09-2020, 07:47 PM

I have had good experience using SEM's "Rust Shield Product". Call Dave at SEM's tech line and describe the situation, and ask him what he thinks. He one great resource when it comes to SEM's products. Dave usually suggests; remove as much of the loose rust & scale, and then apply "Rust Shield". I use the catalyst with it as it toughens the paint. Not bullet proof, but close. I used it on places on the underside of the unibody of a 2001 Jeep daily driver, and it has withstood a number of New England winters.

11-09-2020, 07:47 PM	#11
russcc Senior Member Join Date: May 2010 Posts: 2,871	Re: Rust I have had good experience using SEM's "Rust Shield Product". Call Dave at SEM's tech line and describe the situation, and ask him what he thinks. He one great resource when it comes to SEM's products. Dave usually suggests; remove as much of the loose rust & scale, and then apply "Rust Shield". I use the catalyst with it as it toughens the paint. Not bullet proof, but close. I used it on places on the underside of the unibody of a 2001 Jeep daily driver, and it has withstood a number of New England winters.