Re: Rear Axle Messtoration
I had the same exact situation. The shock mounts you refer to were sold by J C Whitney back in the sixties. I know because I bought a set and had them installed on my coupe back then. They turned out not to be such a great idea so later I decided to remove them. It was a fairly tedious job but it turned out well. I didn’t use a torch. I used a pneumatic grinding tool to cut away as much of the weld material as possible. I did have to cut away some of the metal strap to free it from the axle. After grinding off the remaining weld it’s hardly noticable
Sent from my iPhone using Tapatalk
|