View Single Post
Old 09-30-2018, 05:29 PM   #5
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,371
Default Re: F1 wheel cylinders

Some of the foreign made products don't get the threads quite right and they can be too loose. There is also a possibility that the tapered seat isn't right. Not a lot can be done if the valve won't seat correctly enough to seal the system. I would try the speed bleeders and see if they will seal it. Wrap the threads with teflon tape if necessary but the valve still has to seat properly.
rotorwrench is offline   Reply With Quote