View Single Post
Old 04-04-2018, 11:00 PM   #1
Richard in Anaheim CA
Senior Member
 
Richard in Anaheim CA's Avatar
 
Join Date: May 2010
Location: Anaheim California
Posts: 551
Default Turn Signal Beeper

Turn signals work fine. In a quiet place, like in the garage without the engine running I can hear the clicks when it operates. Forget it on the road. I drive merrily down the road with my blinker on.

I bought a beeper from Snyders and the instructions are explicit and simple. With 12V negative ground, which I have, black wire to ground and red wire to blue wire. Its nice and loud when tested on the battery.

OK, I assume the socket which holds the "blinker" is the source of the blue wire. Nope, it has red, black and yellow.

Any good suggestions out there.

The following have already been used. 1. Model A doesn't have 12V 2. Model A doesn't have turn signals. 2. Whats the matter don't you have a left arm?

Richard
Anaheim CA
Richard in Anaheim CA is offline   Reply With Quote