The Ford Barn - View Single Post

Pete from OZ · 04-29-2019, 04:01 AM

I just did mine, I removed the two support rods at the top of the radiator, loosened the top radiator hose at the head, and just moved the top forward towards the headlight bar. Bonnet will come loose, but I have a bracket that holds both sides up at once.
Removed the water pump with fan connected, and changed over on the bench.

04-29-2019, 04:01 AM	#2
Pete from OZ Member Join Date: Jun 2011 Location: Sydney - Australia Posts: 87	Re: 2 blade fan replacement I just did mine, I removed the two support rods at the top of the radiator, loosened the top radiator hose at the head, and just moved the top forward towards the headlight bar. Bonnet will come loose, but I have a bracket that holds both sides up at once. Removed the water pump with fan connected, and changed over on the bench.