Quote:
Originally Posted by Roadster62
When everything comes home from the blaster prime it well inside and out. I put a coat of paint on the inside of both sides before the welting goes in. I'm not a "Standards" owner but think the cowl was assembled and the body was painted in one shot at the factory. Bob
|
Our un-rebuilt 28 Tudor was repainted by a previous owner in one shot with the welts installed. From what I have read in several posts, the factories also painted over at least some of the welts.
My problem is that the welts show up very badly, almost white against the dark blue (not a good colour) paint. Any hints for remedy without a rebuild, would be appreciated.