Most of my experience is with the Model A carbs but rennerscorner website clearly shows the Model B Cap jets to be different from Model A.
FYI:
All Model B Cap jets I have seen are different from Model A ones.
http://rennerscorner.com/carburetor.html
see SECOND
JET set
RC-9501-32 on the page above. click on photo to enlarge.
Quote:
Originally Posted by Richard Lorenz
There is a serious error in the De Angelis drawing G.D. 04 on page B-3. The Cap Jet is drawn completely wrong. There are no side holes in the Cap Jet, and the "restrictor" (Jet) end should be at the top.
As far as I know, the Cap Jet for the B carburetor is the same as that used in the Zenith-1 and Zenith-2 carburetors that are standard with the Model A Ford.
|